Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories

SKS Stainless Fender Drawbolt/Nut
$13.99
Set of 8 SKS stainless fender drawbolt/nuts
SKS X-Tra Dry
$15.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
Re-Cycle 3 Posters
$59.85
24x36" (x3) color posters CARBON IMPACT - Driving a gasoline powered car produces about 1 pound of carbon dioxide (CO2) per mile. (source) - Manufacturing a car also produces CO2. Over the lifetime of the average car, the manufacturing "cost" is about 1.1 pounds of CO2 per mile. (source) - Added together, this means that driving a car emits about 2.1 pounds of CO2 per mile. - This also means that driving electric cars won’t save us. Without any fossil fuel consumption, a car still "emits" 1.1 pounds of CO2 per mile because of the pollution created through manufacturing. - Riding a bicycle also uses fuel. Riding a bike burns calories. The more you exercise, the more you have to eat and food production has a CO2 impact. - The average rider produces 0.06 pounds of CO2 emissions per mile by way of consuming more food. This number goes up if that extra food is meat. It goes down if that extra food is kale. (source) - The CO2 "costs" of manufacturing a new bicycle are also about 0.06 pounds per mile. (source) - So riding a bike produces about 0.12 pounds of CO2 per mile, about 5% of a car's 2.1 pounds. - Walking burns almost 3 times as many calories per mile as bike riding. (source) - With no manufacturing "costs" walking produces about 0.18 pounds of CO2 per mile. It takes more calories to walk a mile than to bike a mile. (The manufacturing cost of shoes was not factored into these numbers.) MILES PER HOUR - A car can travel 60 miles in an hour. - A bicycle can cover 10 miles in an hour. (source) - A pedestrian can travel about 4 miles an hour. - Keep in mind that half of car trips taken by Americans are 3 miles or less (source) and that 10 miles gets you just about anywhere in Minneapolis/St. Paul. COST Nerdwallet.com has a great cost calculator for car ownership that breaks down purchase price ($372), fuel costs ($146), insurance ($98), maintenance ($99), and other miscellaneous fees ($12) on a per month basis. Put in your own data to see your car's total costs each month. Better yet, use your own data to see your BIKE'S total costs each month. - At Recovery Bike Shop we estimate the average customer spends $200 per year to commute by bicycle. - That's $500 every five years to buy a "new" bike every five years - plus $100 per year in maintenance for a moderate commuter. - That's $1000 per five years or $200 per year. - That's $16.67 per month. - The average bike commuter consumes more calories than the average car commuter. The cost of that increased food consumption is something like $1.87 per day. (source) - This means the food costs of bike commuting are $56.10 per month. - So, the costs of owning and operating a bike are something like $72.77 per month. - Of course, your health care costs will likely go down.
- Given that the "fuel" required for walking is three times that of biking on a per mile basis, we might surmise that the average walk-commuter must spend $168.30 per month on additional calories. (source) - However, it is probably less than this since a person that walks instead of bikes or drives is likely to cover fewer miles per day. We've assumed that the average walk-commuter travels something like half of the distance of a bike commuter each day. - This brings the cost of walking as transportation down to about $85 per month. Actually pretty comparable to bike-commuting. Of course this says nothing about the costs of kicks. These are the numbers reflected in the poster above. What the cost numbers don't show is that the average American drives 876 miles in a month. The average bike commuter comes no where near this. And walkers travel even less. So it is also helpful to look at these numbers on a per mile basis. - The average gasoline powered car costs about $0.83 per mile (including gas, purchase price, insurance, etc.). - The 2014 census says that the average bike commute is 19.3 minutes.
Re-Cycle Carbon Impact Poster
$19.95
24x36" color poster - Driving a gasoline powered car produces about 1 pound of carbon dioxide (CO2) per mile. (source) - Manufacturing a car also produces CO2. Over the lifetime of the average car, the manufacturing "cost" is about 1.1 pounds of CO2 per mile. (source) - Added together, this means that driving a car emits about 2.1 pounds of CO2 per mile. - This also means that driving electric cars won’t save us. Without any fossil fuel consumption, a car still "emits" 1.1 pounds of CO2 per mile because of the pollution created through manufacturing. - Riding a bicycle also uses fuel. Riding a bike burns calories. The more you exercise, the more you have to eat and food production has a CO2 impact. - The average rider produces 0.06 pounds of CO2 emissions per mile by way of consuming more food. This number goes up if that extra food is meat. It goes down if that extra food is kale. (source) - The CO2 "costs" of manufacturing a new bicycle are also about 0.06 pounds per mile. (source) - So riding a bike produces about 0.12 pounds of CO2 per mile, about 5% of a car's 2.1 pounds. - Walking burns almost 3 times as many calories per mile as bike riding. (source) - With no manufacturing "costs" walking produces about 0.18 pounds of CO2 per mile. It takes more calories to walk a mile than to bike a mile. (The manufacturing cost of shoes was not factored into these numbers.)
Re-Cycle Cost Poster
$19.95
24x26" color poster Nerdwallet.com has a great cost calculator for car ownership that breaks down purchase price ($372), fuel costs ($146), insurance ($98), maintenance ($99), and other miscellaneous fees ($12) on a per month basis. Put in your own data to see your car's total costs each month. Better yet, use your own data to see your BIKE'S total costs each month. - At Recovery Bike Shop we estimate the average customer spends $200 per year to commute by bicycle. - That's $500 every five years to buy a "new" bike every five years - plus $100 per year in maintenance for a moderate commuter. - That's $1000 per five years or $200 per year. - That's $16.67 per month. - The average bike commuter consumes more calories than the average car commuter. The cost of that increased food consumption is something like $1.87 per day. (source) - This means the food costs of bike commuting are $56.10 per month. - So, the costs of owning and operating a bike are something like $72.77 per month. - Of course, your health care costs will likely go down. - Given that the "fuel" required for walking is three times that of biking on a per mile basis, we might surmise that the average walk-commuter must spend $168.30 per month on additional calories. (source) - However, it is probably less than this since a person that walks instead of bikes or drives is likely to cover fewer miles per day. We've assumed that the average walk-commuter travels something like half of the distance of a bike commuter each day. - This brings the cost of walking as transportation down to about $85 per month. Actually pretty comparable to bike-commuting. Of course this says nothing about the costs of kicks. These are the numbers reflected in the poster above. What the cost numbers don't show is that the average American drives 876 miles in a month. The average bike commuter comes no where near this. And walkers travel even less. So it is also helpful to look at these numbers on a per mile basis. - The average gasoline powered car costs about $0.83 per mile (including gas, purchase price, insurance, etc.). - The 2014 census says that the average bike commute is 19.3 minutes. (source) - The average rider travels 11 miles per hour. (source) - So the average commute is about 3.5 miles. - Twice a day is 7 miles. - Assume 5 days a week and 251 work days per year and we get 148 miles per month. - Add another 102 miles (educated guess) for errands and riding to see friends and family and probably the average bike commuter puts on something like 250 miles per month. - That's about $0.30 per bike mile. Again, most of that is in additional food consumption.
Re-Cycle Miles Per Hour Poster
$19.95
24x36" color poster - A car can travel 60 miles in an hour. - A bicycle can cover 10 miles in an hour. (source) - A pedestrian can travel about 4 miles an hour. - Keep in mind that half of car trips taken by Americans are 3 miles or less (source) and that 10 miles gets you just about anywhere in Minneapolis/St. Paul.
Re-Cycle Trees Needed Poster
$19.95
24x36" color poster - AAA says the average American drives 29.2 miles per day. (source) That's 61.32 pounds of CO2. (source) - There are lots of kinds of trees with varying capacity to absorb CO2 and different lifespans and such, so we assumed the average tree absorbs 1000 pounds of CO2 over the course of a 50 year lifespan: 20 pounds per year, 0.05 pounds per day. (source) - This means the average American driver needs a forest of 1,119 trees to absorb or offset the CO2 emitted by driving a car. - If the average cyclist rides 12 miles per day, they will produce 1.44 pounds of CO2. - A person walking 8 miles per day will also produce 1.44 pounds of CO2. - Each of these people will require 26 living trees to offset their daily carbon footprint of transportation.
Portland Design Works Dave's Mud Shovel Rear Fender
$22.99
The Dave's Mud Shovel fender by Portland Design Works is designed specifically for fat bikes. It's extra-long, wide design blocks the snow, water, and sand that you'll be blasting through on your next fat bike adventure, keeping your backside dry. • 5.5-inches wide • 22.5-inches long
Portland Design Works Pathfinder
$39.99
The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)
Portland Design Works Rack Hardware
$6.99
It's always a good idea to have backup hardware. This is a replacement hardware pack for Portland Design Works Payload or Loading Dock rear racks. - 2x P clamps - 4x nyloc nuts - 4x hex bolts
Planet Bike Cascadia Fenders (29er)
$54.99
Turn your big-wheeled bike into an all-weather vehicle with the Cascadia 29er Fenders. Made of unbreakable polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Cascadia Fenders (Hybrid/Touring)
$54.99 - $64.99
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Cascadia Fenders (Road)
$54.99
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Eco Rack
$29.99
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
Planet Bike Front Fender Release Tabs
$6.99
- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
Planet Bike Hardcore Fender (Recumbent) (26-Inch, Rear)
$29.99
Turn your 'bent into an all-weather vehicle with Planet Bike's Hardcore Fender! Made of unbreakable Superflex polycarbonate with stainless-steel stays, it's ultra tough. The adjustable stay positioning provides a secure fit on any style recumbent. The mudflap provides the ultimate in splash and spray resistance. Plus, the hardware is pre-installed for hassle-free mounting.
Planet Bike Hardcore Fender Hardware Kit (35mm)
$4.99
- Compatible with Hardcore fenders - 700c x 35mm - Contains 35mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
Planet Bike Hardcore Fenders (ATB)
$44.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Hardcore Fenders (Hybrid/Touring)
$44.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Hardcore Fenders (Road)
$44.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Spok USB Light Set
$39.99
This is the "Next Generation" of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy and Superflash modes - FL1 tested - headlight run times: 5 hrs (steady – 20 lm), 8 hrs (Courtesy - 6-18 lm) and up to 26 hrs (Superflash - 20 lm) - FL1 tested - tail light run times: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy - 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust and water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams
Pedro's BB Socket Holder II
$13.99
- Holds socket tool to BB axle to eliminate slippage during removal and installation. New spring preload allows increased flexibility and rotation during use. - New design works with square taper and splined axles with M8, M12, or M15 internal spindle thread. - Made from heat-treated tool steel for the ultimate in strength and lasting performance. - Use with Pedro's Splined Bottom Bracket Socket. Compatible with Pedro's Pro Socket Handle. If you have ever battled with an over-tightened Shimano and ISIS Drive splined bottom bracket cup, you know why Pedro's created the BB Socket Holder. Though these types of bottom brackets proved themselves as the standard for many years and continue to be found on many bikes, the tendency for their shallow splines to slip during removal or installation has resulted in more than a few expletives, high frustration levels, and worst of all, injuries. The Pedro's BB Socket Holder II provides a simple, shop-quality tool that solves this problem. The new design works on bottom brackets spindles with M8, M12, or M15 threads and adds spring preload for increased flexibility and rotation during use. Backed by Pedro's lifetime warranty.
Pedro's Cable Cutter
$34.99
Cable cutters are an essential tool used for some of the most fundamental elements on the bicycle. What seems like a simple tool can often be the root of frustration when poor cut quality ruins a brand new cable, crimps housing shut, or leaves strands uncut. The Pedro's Cable Cutter is an industry favorite and when put to the test against the competition and you will quickly see why. Our cable is designed for years of service, for comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time.
Pedro's Cable Puller
$29.99
Sometimes the task at hand requires more hands than available. If you've ever worked with some of the more finicky bicycle brakes, you know what we are talking about. Pedro's Cable Puller (commonly known as the "Fourth Hand Tool") provides the perfect tool for tensioning brake or derailleur cables while making adjustments. Featuring one hand operation, ergonomic cushioned handles, and a thumb lock, this tool simultaneously grips and tensions the cable while keeping your other hand free to secure the cable in place. End the frustration and pick one up! Made from heat-treated laser-cut steel.
Pedro's Tire Levers
$3.99 - $120.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
Park Tool Adjustable Cup Bottom Bracket Wrench
$15.99
Park's Bottom Bracket Wrench has 2 ends to fit slotted bottom bracket adjusting cups and cups with raised 16mm wrench flats common on older English and less-expensive bicycles. Please ask if you have any questions whether this wrench is right for your repair.
Park Tool Bottle Opener
$7.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
Park Tool Cassette Lockring Tool with 5mm Guide Pin
$9.99
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
Park Tool Chainring Nut Wrench
$4.99
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
Park Tool Compact Crank Puller
$14.99
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
Park Tool Crank Puller (Square Taper)
$15.99
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
Park Tool Crank Wrench
$11.99
Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.
Park Tool FR-2 Freewheel Remover
$9.99
The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)
Park Tool FR-3 Freewheel Remover
$13.49
The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park Tool FR-4 Freewheel Remover
$7.95
The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park Tool FR-7 Freewheel Remover
$9.99
The Park FR-7 Freewheel Remover fits Falcon freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park Tool FR-8 Freewheel Remover
$14.95
Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.
Park Tool Folding Chain Tool
$29.95
Park's Folding Chain Tool is a heavy-duty tool-steel shop-quality chain tool that also folds for carrying in your pack or pocket for use on the road and trail. It's compatible with 9-, 10- and 11-speed chains. It also includes a folding peening anvil for Campagnolo 11-speed chains.
Park Tool Freewheel Remover
$9.99
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
Park Tool Home Mechanic Pedal Wrench
$12.99
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Park Tool MTC-30 Multi-Tool
$24.95
The MTC-30 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible drivers - Combo cross/straight tip screwdriver - 8 & 15mm box wrenches - Key ring holder - Weight: 131g (4.62 ounces)
Park Tool Metric Wrench
$6.49 - $11.49
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.
Park Tool Mini Chain Brute Chain Tool
$16.99
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Park Tool Needle Nose Pliers
$26.99
Park's Needle Nose Pliers are professional quality, 6-inches long, and made from forged, heat-treated chromoly steel. For ease of use they have a hidden spring, cutting jaws and 5 different gripping and crimping areas. Plus, they have soft-touch, dual-density handles for an excellent grip.
Park Tool P-Handled Hex Wrench (5mm)
$7.99
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.
Park Tool P-Handled Hex Wrench (6mm)
$8.95
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.
Park Tool PolyLube 1000 16-Ounce
$17.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool PolyLube 1000 4-Ounce
$7.00
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool Portable Wheel Dishing Tool
$34.95
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Portable Wheel Dishing Tool is a must. It disassembles quickly for storage or travel and allows you to easily check centering on road, mountain and BMX wheels from 24 to 29 inches in diameter and it works with any hub. The Wheel Alignment Gauge is a necessity for every wheelbuilder.
Park Tool Professional L-Shaped Hex Wrench Set
$24.99
These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access. • Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes • Wrench tips are precision chamfered for a clean, tight fit • Made from industrial-quality Bondhus Protanium high torque steel
Park Tool Professional Pedal Wrench
$34.99
Park's Professional Pedal Wrench features an angled, oversize head for maximum leverage. It has two 15mm wrenches at different angles, so you can maximize your leverage, and a long, round, vinyl-coated handle that won’t dig into your hand the way flat wrenches do. There's even a hole in the end for hanging the wrench on your toolboard.
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$5.99
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Park Tool Replacement Chain Tool Pin
$0.99 - $4.95
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
Park Tool Replacement Clamp Covers
$9.14 - $25.08
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
Park Tool SPA-1 Pin Spanner
$9.99
Park's Pin Spanners are designed for maximum usefulness and versatility at the best value. Tough high-carbon tool steel is used to ensure long life and the handles are vinyl coated for a great grip and color-coded for easy identification. The green-handled SPA-1 is used to turn the adjustable bottom-bracket cup found on most 3-piece cranksets.
Park Tool Shop Apron
$19.95
Park’s Shop Apron protects your clothes and provides large pockets to hold frequently needed tools. It’s made of heavy-duty, 7-ounce poly/cotton twill for comfort and durability.
Park Tool Shop Cone Wrench
$8.49 - $8.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Park Tool Shop Screwdriver
$4.99 - $5.49
Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.
Park Tool Spoke Wrench
$7.49 - $9.49
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
Park Tool Sprocket Remover / Chain Whip
$29.95 - $29.99
This combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending and flexing, with a molded handle for comfort. - 3/32-inch model Works on 5- to 12-speed cassettes and freewheels - 1/8-inch model works on 1/8-inch chains and sprockets - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools - Features hardened pins to keep the chain in place
Page 1 of 40 Next page