A simple (cute) safety light that is easy to install just about anywhere on your bike. Purchase includes a front (white light) and rear (red light).
• Water resistant black silicone body • Up to 100 hours run time • Flashing and steady modes • Each light uses 2 x CR2032 batteries (included)
The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)
This is the "Next Generation" of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy and Superflash modes - FL1 tested - headlight run times: 5 hrs (steady – 20 lm), 8 hrs (Courtesy - 6-18 lm) and up to 26 hrs (Superflash - 20 lm) - FL1 tested - tail light run times: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy - 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust and water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side “gills” that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. The TL 5.0 SL has five ultra bright LED's with four different operating modes, including three different flash modes. New for 2015, the amber Side Lights help to provide even more visibility from the sides of the rider. The TL 5.0 SL will help keep you safe and seen from behind (180 degree visibility). The TL 5.0 SL operates on 2 AAA batteries (included) for up to 100 hours on flash. MAKO 200 Side lights Economical, high output light Super bright flash setting ideal for daylight use Easy operation battery operated (comes with 2 x AA) 3 light settings – High, Low and Flash TL 5.0 SL 5 Ultra Bright LEDs 100 hours run time Inexpensive high quality light Super bright day time flash mode 4 operating modes Runs on AAA batteries FL 1 Standard IP64, water resistant MAKO 200 Lumen Output: 200 Run Time: 15:00 – 60:00hrs Weight: 175g Battery: Alkaline AA x 2 TL 5.0 SL Lumen Output: 10 Run Time: Up to 100hrs Weight: 70g Battery: Alkaline AAA x 2 WARRANTY The Mako 200 and TL 5.0 SL are both backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES MAKO 200 LED Light Head Handlebar Mount 2 AA Alkaline Batteries TL 5.0 SL LED Tail Light Seatpost Mount 2 AAA Batteries
The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. Daylight Visible Flash (DVF) 80 lumen super bright tail light Easy on and off seat post strap mount with quick release tab Amber side lights for 180 degrees of visibility Convenient USB rechargeable Be Seen by cars = Be Safe FL1 Standard IP64, water resistant Lumen Output: 80 Run Time : 1:30 – 10:30hrs Charge Time: 1:30hrs Weight: 28g Battery: Li-Po WARRANTY The Sabre 80 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES LED Tail Light Seatpost Mount USB Cable
The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it’s USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. SWIFT 300 - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable SABRE 80 - Daylight Visible Flash (DVF) - 80 lumen super bright tail light - Easy on and off seat post strap mount with quick release tab - Amber side lights for 180 degrees of visibility - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant WARRANTY - The Swift 300 and Sabre 80 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES SWIFT 300 - LED Head Light - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable SABRE 80 - LED Tail Light - Seatpost Mount - USB Cable
Light & Motion's Urban 500 lights up your daily commute. It's light, bright, and rugged for urban and off-road adventures alike. Featuring: • 500 Lumen output certified to the FL-1 Standard. • Engineered with top of the line CREE LED and enhanced firmware. • It is the only light in its class with an accurate 4 level battery charge status indicator so you know if you have the juice to get home. • Custom engineered reflector optimizes the light to provide the most efficient and effective distribution of light for cycling. • Amber Side lighting for a full 180 degrees of visibility. • Designed to be mounted on your handlebar or helmet (tool-free system). • Lightweight aluminum body with integrated heat sink fins. • MicroUSB Rechargeable (fully charges in 5 hours). • Low battery warning and auto shut-off to prevent damage. • Multiple power settings. Runtime/Lumens • High 1:30/500 • Med 3:00/225 • Low 6:00/115 • Pulse 12:00/115
Light & Motion's Vis 180 Taillight offers both visibility and convenience with its unique design. It combines high-power LEDs, custom reflectors and a rechargeable lithium battery for total convenience and unmatched visibility on the road and trail. Featuring: • 70 Lumen output certified to the FL-1 Standard. • Engineered with the highest-level CREE LED and enhanced firmware. • Dual LED array to maximize visibility. • Ultralight aluminum body. • Accurate battery charge and status indicator with 4 status levels. • Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees. • Secondary LED spreads amber light for 180 degrees of visibility. • Simple ratchet in/out adjustability. • Slide lock system allows you to easily take on/off without tools. • Integrated clip for attaching to backpack or messenger bag. • Bike rack mount available and sold separately. • MicroUSB Rechargeable (fully charges in 5 hours). • Low battery warning and auto shut-off to prevent damage. • Multiple power settings. Run time/Lumens • HiPulse: 6:00/70 • LoPulse: 12:00/35 • Solid: 4:00/75 • Paceline: 32:00/5
A simple (cute) safety light that is easy to install just about anywhere on your bike. Purchase includes a front (white light) and rear (red light).
Small, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm Modes/Run Time - Constant: 50 hours - Rapid flashing: 100 hours - Slow flashing: 100 hours
Let everyone know you're coming with CatEye's Omni 5 Front Light, which uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.
$24.99 - $26.99
Blackburn's minimalist Click light sets are incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar, seatpost, or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 20-lumen front - 4-lumen rear - Versatile silicone mounting system - Waterproof to IP-65 standard
$14.99 - $15.00
Blackburn's minimalist Click rear light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 4 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 4 lumen rear - Versatile silicone mounting system - Waterproof to IP-65 standard
Being Seen From All Angles Has Never Been Easier We understand being able to see in the dark is important, but we also believe that so is being visible to cars. A recent study by the National Highway Traffic Safety Administration (NHTSA) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). With the Luminate 360 set, being seen from all angles while cycling has never been easier. The grid side beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. While the grid side beacon can be used as a stand alone light, we believe it works best as part of our Luminate 360 light set. The Dayblazer 400 front light and the 65 rear are spec'd with blitz mode to keep you bright enough to be seen, day or night. - 165 grams (140 front, 48 rear, 58 side) - 4 Lithium polymer/lithium ion batteries included - Rear: Solid 50 lumen, 1.6 hr runtime; High Flash 65 lumen, 3 hr runtime; Low Strobe 35 lumen, 6 hr runtime - Side: High/Solid 85 lumen, 1.5 hr runtime; Low/Solid 50 lumen, 3 hr runtime; High/Flash 85 lumen, 3 hr runtime; Low/Strobe 50 lumen 6 hr runtime - Front: Blitz 400 lumen, 1 hr runtime; Low 200 lumen, 1.5 hr runtime; Pulse 200 lumen, 6 hr runtime; Strobe 200 lumen, 10 hr runtime - Charges via any standard USB port (charging cable included) - IP-65 Submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction.
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Topeak's HeadLux helmet light is the Siamese twin of bike lights. This one light does double duty with two super-bright LEDs facing forward and two red LEDs facing the rear. Its 3 modes and wrap around lenses ensure you'll be seen. A nice supplement to your regular light set, the HeadLux is a convenient way to add extra safety to your commute. Plus, batteries are included.
Ride safe and be seen at night with the high-performance helmet light. Innovative double-sided helmet-mounted light shines white facing forward and red towards the rear, and features 4 LEDs for excellent visibility. Rubber straps provide easy installation and flexible mounting options on a helmet. - Max Luminous Intensity: 140 Lumens (Front), 10 Lumens (Rear) - Lamp: 2 white high power LED’s (Front), 2 red high power LED’s (Rear) - Battery: 3.7V 680mAh Lithium Ion (integrated) - Control/Burn Time (approximate): 3.3hr (High), 5.5hr (Middle), 33hr (Low), 28hr (Front: Middle / Rear: Blinking) - Charge Time (approximate): 2hr / Micro USB - Input: 5V 500mA - Lamp Housing: Injection molded polymer - Strap Mount: Fits helmet / road bike dropbar - Waterproof: IPX 6 - Low battery indicator - Size: 6.9 x 4.4 x 2cm / 2.7” x 1.7” x 0.8” - Weight: 40g / 1.41oz
Topeak's Tail Lux helmet light mounts to any helmet or Topeak bag or rack with ease. Its constant and blinking modes ensure you'll be seen. A nice supplement to your regular light set, the Tail Lux is a convenient way to add extra safety to your commute. Plus, the coin battery is included.
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
Others out on the roads and paths will see you when Sunlite's HL-L380 Headlight is on your bike. It sports 3 bright Nichia LEDs, steady and flashing modes, and 200 hours of run time! A quick-release handlebar mount is included, too.
Put it on your handlebars, put it on your fork leg, put it anywhere, Sunlite's Griplite goes everywhere. This powerful little light has 4 LEDs and runs for 60 hours! It has steady and flashing modes and is housed in a water-resistant body.
Put it on your seatpost, put it on your seatstays, put it anywhere, Sunlite's Griplite goes almost everywhere. This powerful little light has 4 LEDs and runs for 60 hours! It has steady and flashing modes and is housed in a water-resistant body.
- Single LED front and rear combo pack - 1-Super bright LED - Dual modes - steady and flashing - Water resistant alloy construction - Multi-fit QR bar/post mount - Uses 2x CR2032 lithium batteries (included)
- 6 lumen LED safety light - Built-in Li-Ion USB rechargeable battery - 2.5 ~ 10 hour run time per charge - Charging and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant
- Single LED 115 lumen light - Water resistant aluminum casing - Multi-fit QR mounting bracket - 3 AAA batteries provide power for up to 18 hours - 3 modes including 2 solid, and one flashing setting
- 350 lumen XM-L LED - Built-in Li-Ion USB rechargeable battery - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit QR handlebar bracket - 2.2 ~ 6 hour run time per charge
Page 1 of 9 Next page