Filter By:

  • Show More Brands

  • Show Fewer Brands

Handlebars

3T Ergoterra Team
$329.99
3T's Ergoterra is wide, ergonomic and designed specifically for cyclocross. This carbon bar's flared drops angle outwards by six degrees for comfort and control over rough terrain. A reinforced central section on the top adds stiffness as well as strength for the option of mounting cross top bar brakes. It has a compact drop and reach, perfect for sprints and reaching your brakes at all times. - Viewed from above, the drops angle outwards by 6° - 45cm model is 42cm at the hoods, while the 47cm model is 44cm at the hoods - Compound-curved bends preserve the vertical alignment of brake/shifter levers at their mounting point, so outward flare does not alter shifters’ ergonomics - The 31.8 mm center section is extended and reinforced to mount cyclocross top brake levers - On rough ground that jostles the rider’s handhold, Ergoterra offers more lateral clearance for the forearms, helpful for run-ups
3T Superergo Team Stealth
$350.00
Since its introduction, the most common feedback on our Ergonova drop bar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera Team Stealth
$350.00
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superergo LTD Stealth
$425.00
Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera LTD Stealth
$425.00
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Answer Products Alumilite Handlebar
$30.40
Answer's Alumilite handlebars provide ample width and rise to fit a 25.4mm stem clamp size. - Weight: 325g - Upsweep: 4° - Backsweep: 8°
Chromag FU40
$95.00
All Mountain / Freeride / Dirt Jump For those who prefer more rise, Chromag didn't just put more bend in an existing bar stock. The FU40 Hi-Rise handlebar features a specific wall profile optimized for the additional length and torque that corresponds to its shape. Premium quality 7000 series alloy for the best strength to weight ratio.
Chromag Fubars OSX Handlebar
$95.00
Chromag's original all-of-the-above riding style handlebar, the Fubars OSX is made with premium 7000 series alloy. Weighing in at a race-light 310 grams, it features a low profile rise, and dialed 5° upsweep, 8° backsweep orientation.
Chromag OSX 35
$95.00
DH / Freeride / All Mountain Chromag utilizes the 35mm clamp size to create a wider, stronger bar in the same weight class as its 31.8 counterpart - the Fubars OSX. The OSX 35 is made from 7000 series aluminum. It provides the best strength to weight ratio possible. This is a strong bar best suited to DH/Freeride or trail riding. At 800mm it is our widest aluminum bar. Same perfect fit as the original OSX, with 25mm rise, 5-degree upsweep and 8-degree back sweep.
Chromag BZA Handlebar
$181.00
Featuring a weight savings of 25% compared to aluminum bars, Chromag's BZA riser bar is wide, stiff and rowdy. Intended for everything from XC to DH, it features unidirectional fibers for vibration damping. - Upsweep: 5° - Backsweep: 8°
Chromag Cutlass
$181.00
All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.
Crank Brothers Cobalt 11 Handlebar
$144.00
The Crank Brothers Cobalt 11 Handlebar is the perfect weight-saving, stiffness-enhancing upgrade for your prized bike! It's constructed from high modulus carbon for an unreal stiffness-to-weight ratio and the choice of 8 or 15mm of rise lets you find the ideal position for climbing up and ripping down.
Deda Elementi Deda Dritto Fixie Flat Bar
$33.29
- Strong and reliable 6061-T6 aluminum construction designed for urban-fixie use - Narrow 500mm (19.7") width perfect for the tarmac - Polished silver with black graphics
Deda Elementi Pista Alloy Track Bar
$95.90
- Straight-gauge 6061-T6 aluminum construction - Purebred classic track bar with an updated 31.8mm bar-clamp diameter - Deep drop and reach profile for true sprinting performance - Matte black with silver/white graphics - 280g @ 42cm: drop/reach are measured center-to-center, width is measured outside-to-outside
Deda Elementi Velocita CrMo Track Bar
$103.29
- High-polished, chrome-plated CrMo construction - Purebred classic track bar in either 31.8mm or 26.0mm bar-clamp diameter - Deep drop and reach profile for true sprinting performance - 654g @ 42cm(26.0mm): drop/reach are measured center-to-center
Dimension Arc Bar Handlebar
$19.99 - $20.00
A great bar for your fixie, single speed, or cruiser. - Aluminum Arc bar with wide sweep - May come in OEM packaging - Back Sweep (deg): 27 - Material: Aluminum - Rise: 0mm
Dimension Cruiser
$19.99
A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position. - AL-6061 aluminum alloy - ISO4210 safety tested for city/trekking use - Not recommended for use with bar-ends or clip-on aero bars - 50-degree sweep
Dimension High-Rise
$19.99
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep
Dimension Mountain Handlebar Flat
$19.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - Zero-Rise
Dimension Urban Cruiser Handlebar
$20.00
Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm
Dimension Mountain Handlebar 35mm Rise
$24.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise
Dimension Trekking Handlebar
$29.99
Traditional trekking bar with butterfly bend provides many options for hand positions, making this bar a comfortable choice for touring and recreational cyclists alike. - Designed for City-Trekking use - Not intended for mountain biking - Bar Clamp Diameter (mm): 25.4 - Color: Black - Lever Compatibility: Mountain 22.2 - Weight: 479g - Width: 585mm
Dimension Road Handlebar
$33.99
Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.
Dimension Short Drop Handlebar
$39.99
Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing. - Made from 6061 Aluminum - Single-groove cable routing - Accessory Mount Diameter (mm): 26.0 - Bar Clamp Diameter (mm): 26.0 - Bar Drop (mm): 128 - Bar Reach (mm): 80 - Bar Top Style: Round - Clip-on Compatible: No - Drop Bend Style: Compact - Material: Aluminum - Weight: 340g (40cm) - Width Measurement: Center
Dimension Flat Top Shallow Reach Handlebar
$44.99
These are 31.8mm flat top road drop bars with very shallow reach. - Double-butted and tapered 6061-T6 aluminum bars - 120mm wide center section with 31.8mm diameter - Flat top bar with cable grooves - Accessory Mount Diameter (mm): 31.8 - Bar Clamp Diameter (mm): 31.8 - Bar Drop (mm): 125 - Bar Reach (mm): 70 - Bar Top Style: Flat - Clip-on Compatible: Yes - Color: Black - Defined Color: Black - Drop Bend Style: Compact - Material: Aluminum - Weight: 266g - Width: 38cm - Width Measurement: Center
ENVE M5 Mountain Handlebar 31.8mm
$170.00
A fly-weight, modern flat bar for XC and trail riding, available with a +/- 5mm rise. The M5 bar is ENVE's lightest XC and trail bar. Designed with an offset grip position and a 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9-deg sweep with the greater width and strength that’s demanded by today’s more aggressive XC riders.
ENVE M6 Mountain Handlebar 31.8mm
$170.00
Simply put, it’s the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
ENVE M7 Mountain Handlebar 35mm
$170.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
ENVE M9 Mountain Handlebar 31.8mm
$170.00
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
ENVE Road Handlebar Compact Drop
$350.00
Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short reach shallow drop geometry and full Di2 compatibility. Who It's For Road riders with a preference for compact geometry, light weight, and refined electronic groupset integration. Why We Made It Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains including compatibility with Shimano RS-EW910 bar end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs.
ENVE Road Handlebar Compact Drop
$350.00
Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short-reach, shallow-drop geometry and full electronic groupset compatibility. Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains, including compatibility with Shimano RS-EW910 bar-end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs. - Material: Carbon Fiber - Di2 Compatible: Yes - Reach: 79mm - Drop/Rise: 127mm - Clamp Diameter: 31.8mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Controls: 6Nm-8Nm - Weight: 40cm - 216g; 42cm - 220g; 44cm - 229g
ENVE SES Aero Road Handlebar
$400.00
An aerodynamically optimized road drop handlebar featuring the latest in electric drivetrain compatibility that will help you go faster through careful handlebar shaping and by reducing the rider’s frontal area. The Smart ENVE System (SES) Aero Road Bar is made from 100% uni-directional carbon fiber and is the stiffest, most race-oriented handlebar in the ENVE handlebar product line. The SES road bar features internal routing for mechanical and electronic systems to further save valuable watts. To further the integration with electronic groups, the bar now accommodates the housing of a junction box in the bar end. The shape of the bar is wind-tunnel and CFD tested for aero efficiency. The bulk of aero gains are made by putting the rider’s body in a fast position which can be maintained for long periods of time without sacrificing power output. Improved rider positioning is achieved by keeping the top of the bar narrow to naturally ease riders into a more aero position. The drops of the handlebar are flared for wrist clearance and confident handling in technical sprints, criteriums, and descents. - Material: Carbon Fiber - Width (C to C in Drops): 40cm, 42cm, 44cm, 46cm - Width (C to C in Hoods): 35cm, 37cm, 39cm, 41cm - Reach: 79mm - Drop/Rise: 127mm - Clamp Diameter: 31.8mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Controls: 6Nm-8Nm
Easton EA50
$49.99
Your rock-steady set and forget road bar. Only a few grams heavier than the EA70 and sporting the same MCD drop technology as our top of the line road bars. These budget friendly bars will leave you comfortable in the saddle all day without breaking the bank. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 315g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Reach: 80mm - Drop: 125mm - Materials: EA50 alloy
Easton EA50 AX
$49.99
Easton’s new AX series now includes our budget friendly EA50 AX flared drop bar. With the same MCD drop technology as our top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less traveled with EA50 AX. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 325g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Flare: 16-degrees - Reach: 80mm - Drop: 120mm - Materials: EA50 alloy
Easton EA70 AX Handlebar
$89.99
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on gnarly terrain and long gravel assaults. - Weight of 42cm bar (grams): 290 - Bar Drop (mm): 80 - Drop Bend Style: Compact - Bar Reach (mm): 120 - Material: Aluminum - Bar Top Style: Round
Easton EA70 Handlebar
$89.99
The EA70 is Easton’s top-end aluminum handlebar with traditional, round tops. The EA70 is given an upgrade with the new MCD shape technology, with grooves for brake and gear cable routing. This race-proven handlebar has won numerous Cyclocross Nationals titles and benefits from all of the aluminum construction techniques that Easton is famous for — including TaperWall technology. - Weight for 42cm bar (grams): 280 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Aluminum - Bar Top Style: Round
Easton EC70 AX
$214.99
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. - Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops) - Flare: 16-degrees - 42cm: 220g - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 120mm - Materials: EC70 carbon
Easton EC70 SL
$214.99
We took our lightest, most comfort-advanced bar – the EC90SLX – and used our second-tier carbon fiber for a more affordable package. The EC70 SL features the same top of the line MCD shape technology for easy position transferring; Taperwall to maintain stiffness while reducing weight; and Intelligent Flexibility for added vibration dampening comfort. It also features recesses for cables and comes in four lengths. The EC70 SL is the full race package deal. - Bar weight: 220g (42cm) - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC70 carbon
Easton EC70 Aero Handlebar
$249.99
With the EC70 Aero, you'll stay comfortable while reducing drag. Thanks to the flattened top profile with internal cable routing and MCD shape technology, this handlebar provides more comfort during long days in the saddle while cheating the wind. And with Easton’s proven composite TaperWall technology and Intelligent Flexibility, the EC70 SL is nice and light at just 255 grams (42cm). - Weight of 42cm bar (grams): 255 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Flat
Easton EC90 SLX
$269.99
The EC90 SLX is comprised of advanced carbon construction for Easton’s lightest road bar to-date. This handlebar features Easton’s new MCD shape technology for a unique ride quality and comfort. TaperWall technology and Intelligent Flexibility team up to deliver a perfectly tuned bar that weighs just 195-grams. Shimano, SRAM or Campagnolo levers can be positioned for a smooth transition on the tops and into the bend, with cables wrapped neatly in the bar’s designed recesses. - Bar weight: 195mm (42cm) - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC90 carbon
Easton EC90 Aero Handlebar
$299.99
The EC90 Aero features an improved anatomic sculpted wing top section and provides more comfort during long days in the saddle. Bar-end flare provides wrist clearance for sprinting. The EC90 Aero fetaures Maximum Contact Drop (MCD), designed for comfort when you’re in the zone. MCD packs comfort-enhancing features like extended drops for greater grip range, 5-degree drop flair for increased wrist clearance while sprinting, and increased palm contact to eliminate point-loading that may cause hand fatigue. - Weight of 42cm bar (grams): 230 - Bar Drop (mm): 125 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Flat
Easton E100
$349.99
The E100 name is not used lightly and represents the culmination of nearly 20 years of creating the highest quality carbon components on the market. The new E100 road bar uses the same critically acclaimed Maximum Contact Drop (MCD) shape as our other premium road bars, with a stiff mid-section and long tails at the end of the drops for optimized ride characteristics and more hand positions. Most ultra-light bars sacrifice stiffness, durability and drop length to save weight, but not Easton's. The E100 bar meets the same rigorous fatigue and impact testing standards as our other road bars and does so as the lightest road bar Easton has ever created — a feathery 178g for a 42cm bar. - Finish: Matte UD Carbon/Ultra Gloss decals - Bar weight: 178g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm - Reach: 80mm - Drop: 125mm - Materials: E100 carbon
FSA Omega Compact Road Handlebar
$49.99
Upgrade your bike with FSA's Omega Road Handlebar. The double-butted, tapered and shot-peened aluminum construction makes this bar light and durable. It also features an ergonomic curve for comfort and a variety of hand positions. Plus, the Omega even sports a groove that makes cable routing easy.
FSA Gossamer New Ergo Road Handlebar
$69.99
Upgrade your ride with FSA's Gossamer New Ergo Road Handlebar. Double-butted and shot-peened aluminum construction makes this bar light and durable. Plus, it features an anatomical shape for a great fit and feel, while built-in grooves make for easy cable routing.
FSA Gossamer Wing Compact Handlebar
$69.99
Don't compromise your ergonomics! The Wing Compact Handlebar from FSA provides proper positioning and support. They feature a 34mm Ergo top for excellent bar-top comfort. The double-butted aluminum bars are light, stiff, and shot-peened for strength. The 120mm-wide center section offers plenty of real estate for your favorite accessories. Double-groove cable routing is compatible with any drivetrain system and provides a simple, clean way to install your cables.
FSA Metropolis Handlebar
$70.99
FSA's Metropolis multi-position handlebar features a stylish wing shape for an ergonomic, flip-flop design at home on your commuter, cruiser, or cafe racer. Set it as a high flyer or low rider to suit your personal and riding styles. - Weight: 300g - Width: 620mm - Backsweep: 46.5­° - Lever Compatability: Mountain 22.2mm - Rise: 32mm
FSA Gossamer New Ergo Handlebar
$79.99
Don't compromise your ergonomics! The New Ergo Handlebar from FSA provides proper positioning and support. The double-butted aluminum bars are light, stiff, and shot-peened for strength. The 120mm-wide center section offers plenty of real estate for your favorite accessories. Double-groove cable routing is compatible with any drivetrain system and provides a simple, clean way to install your cables.
FSA Energy Road
$90.99
FSA's Energy Road is a traditional drop bar made from high-strength 7050-aluminium tubing. The finish is shot-peened and sandblasted on the taped areas for grip. There’s even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. - Quad-butted, tapered and shot-peened AL7050/T10 - 120mm wide round center section for mounting accessories - 4-degree outward bend - Bar Drop: 150mm - Bar Reach: 80mm
FSA Energy Wing Pro Compact Road
$90.99
FSA’s Energy compact handlebars push aluminum technology as far as it can go. High-strength 7050 aluminum tubing is manipulated to create varying wall thicknesses and diameter throughout the bar. There’s even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. A shallow drop and short reach are ideal for riders looking for a less aggressive riding position. The finish is sandblasted black on the taped areas for grip, and stylish polished anodizing either side of the stem. - Double butted and tapered AL7050 alloy construction - 34mm ergonomically designed flat top section - 120mm wide round center section for mounting accessories - Weight: 269g (420mm) - 125mm drop, 80mm reach
FSA SLK Mountain Handlebar
$108.99
FSA's SL-K handlebar is the ultimate mix of lightweight and strong, for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both carbon and aluminum construction. The carbon helps keep the vibration to a minimum, while the aluminum core maintains its strength. The SL-K handlebar maintains XC weight with Enduro strength. With both medium 18mm rise or flat options and a solid 740mm width, this bar will help with a perfect fit, great control, and utmost performance for even the most demanding rider in mind. - Weight: 235g - Width: 740mm - Material: Carbon - Upsweep: 4° - Backsweep: 9°
FSA K-Force XC Flat Mountain Bike Handlebar
$199.99
Put the final touch on your lightweight super bike with FSA's K-Force Flat Bar. A mix of carbon fiber and Kevlar makes this bar feathery light and incredibly durable for tough off-road use. Plus, the brake lever, bar-end and stem clamp zones have been reinforced for added strength.
FSA SL-K Compact Road
$228.99
With Kevlar-reinforced unidirectional carbon construction, the SL-K Compact handlebar is ready to race. It features the latest evolution of FSA's compact bar shape, with a shallow 125mm drop and gentle flare. A wide center section gives ample room to mount accessories like GPS units or lights (computer mount available separately). The areas where the stem and levers clamp have additional reinforcement and a textured finish to avoid slip. - Unidirectional carbon fiber finish - Kevlar reinforced construction for exceptional strength and durability - FSA road handlebars are measured from center to center of the drops. Due to the outward angle of the drops, FSA road handlebars will be narrower in the brake hoods than the drops - 4-degree outward bend - Bar Drop: 125mm - Bar Reach: 80mm - Weight: 235g
FSA K-Wing Compact Handlebar
$298.99
Covering huge distances? With its unique shape, FSA's K-Wing Compact handlebar could be just the bar you’re looking for. The drops are the same shape as FSA's other compact bars, but the K-Wing features an Aero-Ergo flat top section that rises from the stem clamp. It’s also slightly swept back, resulting in a shape that follows the natural arc of your arms for enhanced comfort. Also, each width of bar has a proportionally sized top diameter. The carbon/Kevlar composite construction includes internal cable routes that are large enough to handle electronic shift connectors. Due to the outward angle of the drops, FSA road handlebars will be narrower in the brake hoods than the drops. - Weight: 250g - Bar Drop: 125mm - Drop Bend Style: Compact - Bar Reach: 80mm - Material: Carbon - Bar Top Style: Flat - Accessory Mount Diameter: 31.8mm
FSA K-Force Compact Road Handlebar
$329.99
FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.
Fairdale MX Bars
$29.99
The MX Handlebar offers a comfortable way to customize your bike with a bit of BMX style. The low-rise chromoly handlebar is a perfect upgrade to a Weekender Archer bike, for example. Or, put them on any bike in need of some tough chromed chromoly steel! - 7/8” (22.2mm) BMX style clamp (so you’ll need a BMX stem to use them) - 4” rise - 28” width
Fizik Cyrano Composite Carbon R1 Handlebar - Bull
$300.00
Fizik's Cyrano R1 Handlebar gives every cyclist the same low weight, high stiffness, and incredible ergonomics that the pros use. These carbon handlebars use Fizik's unique Spine Concept fitting technology to offer incredible ergonomics and a perfect fit on your bike. Designed for total compatibility with Fizik's saddles and stems (sold separately), the Cyrano R1 Bull handlebar optimizes your position for race day performance.
Fizik Cyrano Composite Carbon R1 Handlebar - Chameleon
$300.00
Fizik's Cyrano R1 Handlebar gives every cyclist the same low weight, high stiffness, and incredible ergonomics that the pros use. These carbon handlebars use Fizik's unique Spine Concept fitting technology to offer incredible ergonomics and a perfect fit on your bike. Designed for total compatibility with Fizik's saddles and stems (sold separately), the Cyrano R1 Chameleon handlebar optimizes your position for race day performance.
Fizik Cyrano Composite Carbon R1 Handlebar - Snake
$300.00
Fizik's Cyrano R1 Handlebar gives every cyclist the same low weight, high stiffness, and incredible ergonomics that the pros use. These carbon handlebars use Fizik's unique Spine Concept fitting technology to offer incredible ergonomics and a perfect fit on your bike. Designed for total compatibility with Fizik's saddles and stems (sold separately), the Cyrano 00 Snake handlebar optimizes your position for race day performance.
Fyxation Rodeo Bullhorn Alloy Bar
$43.95
- Wide center profile for on-the-top spinning and a 205mm forward extension with upswept ends for sprints in the city or on the track - Can be used with track grips, bar-end shifters, or brake levers if needed - 1-piece 6061-T6 aluminum construction
Genetic Digest Flared Drop Bar
$49.95
- Multitude of hand positions with flares to enhance steering control in extreme conditions - Fits standard Road levers, integrated shift/brake levers or bar-end shifters - Butted, heat treated 7050 aluminum alloy with a durable shot peened, anodized finis
Page 1 of 5 Next page