Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$10.75
• Fits 3/8" Axles
• Lightweight, compact design
• Forged aluminum construction
• Chromoly bolt

$6.60
• Anti chain-suck device
• Allows the front derailleur to be adjusted for strong downshifts
• If not using front derailleur the device can act as a chain guide

$9.25
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

$23.50
Origin-8's Down Tube Shifter Adapter is perfect for mounting down tube style shift levers on a bicycle that doesn't have provisions on the frame for them. It's made of light and durable machined aluminum with an anodized finish and fits frames with 1 1/8- to 1 1/4-inch diameter down tubes. Mounting hardware and shims are included.

$13.25
Is your seat post just a hair too small for your frame? Origin-8's Multi-Fit Seat Post Shim is a great solution.
• Multi-Fit
• Aluminum
• 25.4mm internal diameter
• 28.0mm outer diameter

$10.75
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.

$12.20
- Push-in replacement CNC alloy bar end plugs
- MTB-specific design
- Anodized alloy end caps
- Compatible with most handlebar styles
- 20mm OD plug/25mm OD end cap (Road)
- 20mm OD plug/30mm OD end cap (MT

$12.20
- Push-in replacement CNC alloy bar end plugs
- MTB-specific design
- Anodized alloy end caps
- Compatible with most handlebar styles
- 20mm OD plug/25mm OD end cap (Road)
- 20mm OD plug/30mm OD end cap (MTB)

$8.55
Expanding replacement bar end caps with hex bolt
- Reflective silver graphics
- Universal sizing fits most bar styles including Road and MTB
- 18.2mm OD

$18.15
Converts CenterLock hubs to accept 6-bolt rotors
- Available for standard Quick Release as well as Thru-Axle hubs
- Extruded alloy collar with CNC shoulder pins and lock ring
- Eliminates the need for rotor bolts

$36.10
• Machined alloy arm
• (ISCG Mount) international standard
• Adjustable design
• Sealed cartridge bearing
• Prevents dropped chains on mountain bikes

$66.20
• 6061-T6 tubular aluminum construction
• Laser etched graphics
• Independent arm rest and bar adjustment
• Does not include armrests
• Cannot mount shifters onto ends
• Clamp diameter: 25.4-31.8mm
• Extension length: 105mm

$10.45
- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover
- Compatible with both twist off and crimped style bottle caps
- Bottle cap is held in place by two strong magnets
- Easy to switch out bottle caps
- AL6061 alloy cap and AL7075 alloy bolt

$9.75
Origin-8's Pro Force QR Seat Clamp is forged and machined from light and durable aluminum and has an extra-leverage design to hold fast. This fine clamp boasts an anodized finish and a long quick-release lever for excellent clamping force. It also gives you more to hold onto so it's easier to raise/lower your seat.

$7.55
- Anodized or powder coated finish
- Allows for secure clamping
- Forged aluminum construction
- 34.9mm clamp diameter

$21.05
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.

$6.45 - $7.55
- Machined AL6061 alloy construction
- Center sleeve for use with Revolvr outboard bottom brackets
- Converts 68/73mm outboard bottom bracket to a 100mm or 120mm fat bike model
- Seals and protects the bearings from harmful contaminants
- Center sleeve only: Revolvr outboard bottom brackets sold separately

$12.05
This is a bottom bracket adapter that works in conjuction with Origin8 Revolvr BB86/92 Thread-Together bottom brackets to create a PF121 Thread-Together bottom bracket.
- Cup Material: AL6061

$9.25
Forged AL6061-T6 alloy construction with CNC groove design
- Machined insert for even clamping force
- For use with carbon seat posts
- Ultra-lightweight

$70.60
- Provides enhanced chain retention for all 1x drivetrain systems
- CNC machined AL6061 alloy mount with dual-compound chain guide
- Co-molded composite and TPR guide plates greatly reduce noise from chain contact
- Compatible with 28-38T circular and 26-36T oval chainrings
- Boost-compatible
- Easily adjustable
- Mounting hardware included
Page 1 of 2
Next page