Filter By:
Other

$9.00
- Replacement chain pins for Shimano 11-speed chains
- Compatible with CN7900/7801 chains
- 3 pins per pack

$16.99
QUICK-LINK
FEATURE
- Tool-free assembly (possible)
- Non-reusable
- TL-CN10
BENEFIT
- Easy connect
- Compatible with current 11-speed chains
- Quick assembly tool

$9.00
- Replacement pins for 9-speed Shimano chains
- Compatible with CN-7700/HG92 chains
- 3 replacement pins per pack

$135.99
Shimano Di2 External Battery Mounts
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware

$9.00 - $18.00
These are replacement Shimano Rear Derailleur Cage Plates for Deore XT RD-M8000-SGS derailleurs. If these plates are bent or damaged, shifting performance deteriorates significantly leading to skipping chains, mis-shifts, and ghost shifting. Restore the smooth, precise shifting you've come to expect from your XT derailleur.
*Be sure to choose the correct plate if you only need the inner or the outer plate.

$9.00
Shimano XT RD-M786-GS Rear Derailleur Inner Cage Plate
- "B" fit for XTR RD-M986-GS, Deore RD-M615-GS, RD-M610-GS
- OEM inner cage plate for XT RD-M786-GS, SLX RD-M675-GS

$16.00
Shimano Deore XT RD-M786-GS Rear Derailleur Outer Cage Plate
- "B" fit for SLX RD-M675-GS, Deore RD-M615-GS
- OEM outer cage plate for XT RD-M786-GS

$9.00
Shimano Deore XT RD-M786-SGS Rear Derailleur Inner Cage Plate
- OEM inner cage plate for XT RD-M786-SGS, SLX RD-M675-SGS

$16.00
Shimanno Deore XT RD-M786-SGS Rear Derailleur Outer Cage Plate
- "B" fit for SLX RD-M675-SGS, Deore RD-M615-SGS
- OEM outer cage plate for XT RD-M786-SGS

$103.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

$8.99
Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.

$3.00
Shimano E-tube Dummy Plugs
- Extra E-Tube plugs for sealing unused ports on shifters or junction boxes
- Sold each

$26.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

$31.00
This is a rear derailleur mount link for Shimano's XTR M9100 rear derailleur. A straight link is essential to optimal shifting performance and reliability.

$35.00
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set.
- OEM pulley set for Dura-Ace R9100
- Sealed bearing guide & tension pulley
- Guide pulley with extra long teeth for increased chain control

$18.00
Get your scratched Shimano Dura-Ace shifters looking new again with these replacement name plates. They're perfect for sprucing up a well-used bike or erasing the marks of a crash.

$16.99
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

$8.00
This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.

$569.99
- BT-E6000(battery) / SM-BNE60 (battery mount)
- Consistent performance, minimally affected by weather and temperature
- Long life design, greater than 1,000 charge cycles
- BT-E6000 features integrated sense of design with carrier

$586.99
- BT-E6010 (battery) / SM-BME61 (battery mount)
- Consistent performance, minimally affected by weather and temperature
- Long life design, greater than 1,000 charge cycles
- BT-E6010 features easy mounting and release

$12.00
The Shimano Saint M800-2 Bash Guard protects your chainrings and ensures you can get even rowdier on the downhill course.
- Use with CR1078: Saint FC-M800-2 Chainring bolt set
- Shimano OEM bash guard for M800-2 crank sets
- Material: Polycarbonate
- Max chainring size: 32T

$51.00
Shimano Chainring Bolts
- For use with FC-6800 46t outer chainring
- Color: Black
- Length: 10 mm
- Material: Aluminum
- Type: Torx
Page 1 of 2
Next page